< PARTS FIGURE >

    The Illustrations for the selected Parts are displayed on the
    upper left corner of the screen.

    1. Move 'mouse' or scroll bar to select one Part Illustration from
       them.

        The thumbnails for the selected Part Illustration are
        displayed on the right of the screen.

    2. Move 'mouse' or scroll bar to select thumbnails.

        The Figure Illustration is displayed in the center of the
        screen.
 
        * Clicking "Figure" button displays the selected Figures 
          on the [Figure] Screen.
          (The PNCs selected on the Figure Illustrations are also
           linked.)

    3. Move 'mouse' to the PNCs and the Part Numbers which you are
       looking for, and click the left button of the mouse.

        The clicked PNCs are highlighted.

        * Clicking the left button of the mouse again allows the
          selected PNC to cancel.

        * If you prefer clearer vision of the Figure, move the mouse 
          to the place you need to look at and press the right button
          of the mouse. Then the expanded Figure appears.

        * You can also scroll the Figure up and down or left and right
          by moving the mouse with the right button down, while the
          figure is zoomed in.
          When there is no mouse attached to the system, You can
          still move the Figure by pressing "Alt" key together with
          arrow key.

        * The Part Numbers valid for the input Vehicle Information 
          can be highlighted.
          Clicking "CondSwitch" button changes the display mode. 
          
              -When you need to check all Illustlations for the
               Fig-No, regardress of the Production Date and Model,
               select "Match off".

              -When you reduce them by Production Date, Color Code,
               Trim Code, and Model, select "Match on".

              -When you reduce them by Maker Option with Frame No,
               select "OPT Match on".

            When the appropriate Illustration doesn't exist in the
            mode of "Match on" and "OPT Match on", "No Illust" is
            displayed in the Figure display area. 

    * Clicking "Exec" button searches data by the selected PNCs and
      displays the results on the [Parts Number Translation Results]
      screen.

    * You can check the Vehicle Information ([Vehicle Imformation])


<<Message>> 
    Data isn't selected. Select either PNC or Part Number and click
    "Exec" button.
<Explanation>
    "Exec" button was clicked without selection of PNC or Part
    Number.
<System Action>
    None.
<User Response>
    The user must select the PNC or Part Number and click "Exec"
    button.

<<Message>> 
    Do you want to print the Figure?
<Explanation>
    The printing is executed.
<System Action>
    When "Yes" is clicked, a list is output. When "No" is clicked,
    there is no process.
<User Response>
    The user must click "Yes" to contine the printing or click "No"
    to cancel the printing.

<<Message>> 
    PNC cannot be selected over 999. Check your input.
<Explanation>
    The selected PNCs exceeds 999.
<System Action>
    None.
<User Response>
    The user must cancel the selected PNCs or click "Exec" button 
    without adding PNCs.

<<Message>> 
    System error occurred. This EPC will be closed.
<Explanation>
    The system found an error and cannot proceed.
<System Action>
    The system closes the EPC, when "OK" button is clicked.
    The system outputs hard copies and closes the ECP, when "Copy"
    button is clicked. 
<User Response>
    The user must click "OK" button in the message box to close the 
    program or click "Copy" button to print the screen, and report
    to the consultant.